Choosing the right lamp with the right capacity will help you save investment costs and save electricity during use. If you are wondering how to choose the right LED factory light, please refer to the article below:

 

1.High-power LED factory lights

Currently on the market there are many types of lamps for factory lighting. But consumers are gradually turning to LED lights for factories, because of the many advantages it brings.

 

The biggest advantage of LED factory lights:

• The luminous efficiency is large, so the lighting effect is much better. Compared with traditional lamps with the same capacity, LED factory lights emit 2-5 times brighter.

 

• Most of the energy of LED factory lights is for lighting, not wasted by heat like incandescent lamps. So save energy, thereby saving electricity, saving lighting costs for the factory.

 

2. Mistakes when choosing led lights for factories

Choosing a light bulb in factory lighting needs to be based on capacity, besides that we also have to rely on the luminescence efficiency of the lamp, the area of ​​​​the factory. However, there are still small mistakes in the selection of LED lights such as:

 

2.1.The better the light is, the better the light is

• This is the biggest mistake people make when choosing to buy lights. Be aware that each type of light bulb will have different lighting efficiency. For example, a 100w incandescent lamp will have less lighting performance than a 100w factory LED.

 

• Lighting performance you can rely on is the luminaire's luminous flux specification. This unit is measured in Lumens of light. The higher the lumen of the light, the higher the luminous efficiency of the lamp.

 

2.2 The larger the area, the more wattage bulbs need to be used and the larger the number of bulbs

• In the same factory area, an LED light for a workshop with a small capacity but high efficiency can illuminate better than an ordinary lamp with large capacity but poor performance.

 

• There are a few other mistakes such as not calculating the right amount of light for lighting. If choosing lamps based on feelings will lead to excess light or lack of light in production.

 

3.How to choose factory LED power for each factory

 To choose LED factory lights for factories, determining the number of lights is necessary.

 

• First of all, it is necessary to determine the type of lighting space and the lighting purpose of the factory. For example, in a manufacturing and assembly workshop, a typical workspace requires 150-300 (lux) lumens of light per square meter of workshop.

 

• After knowing how much light is needed for your factory. It is necessary to determine the appropriate lamp wattage to create enough light to illuminate your factory space.

 

• After calculating the lamp power, it is necessary to calculate the appropriate number of lamps.

 

Through this article, you probably have a brief understanding of how to choose lamp power, right? If you need our advice or have any further questions, you can email us below or give us a call at MES LED, we are always ready to answer all your questions.

 

Contact Info:

 

MES MECHANICAL SOLUTION JOINT STOCK COMPANY

 

Hotline: 088,678.77.99

 

Fax: 0274 355 77 99

 

Email: info@mes.vn

 

Address: 37, Huynh Van Luy, Phu Loi, Thu Dau Mot, Binh Duong.

 

Website: https://mes.vn/